Mary Jane Low Heel photographed from the side

Cross-section of the Mary Jane Low Heel footbed showing 10 mm of padding under the forefoot, against a millimetre rule. — Footbed section, with the rule

The three-part materials label stitched inside the shoe. — The materials label itself

C-04 · Mary Janes

Mary Jane Low Heel

Name: Mary Jane Low Heel
Brand: Lofra
SKU: C-04
Price: 188 USD
Availability: InStock

A 25 mm heel under the strapped last. 10 / 14 mm at 28 degrees.

USD 188

United States dollars, bought outright. No subscription.

Under the forefoot: 10mm
Under the heel: 14mm
Forefoot flex: 28°

Padding is read with a depth gauge on an uncompressed pair at two fixed points: the centre of the ball of the foot and the centre of the heel seat. Flex angle is the angle the forefoot reaches when the sole is bent by hand against a held heel and kept there for three seconds. Both are averaged over three pairs in size EU 38 and rounded to the nearest whole unit. The full method.

Size — EU, with the foot length it is cut for

Colour

View cart

Try them on carpet indoors. A pair with outdoor wear on the sole cannot be returned. This does not affect your legal guarantee if the pair turns out to be faulty.

What this pair is

The only heel in this line: 25 mm, on a covered block 42 mm across at the base.

Raising the heel shortens the forefoot flex angle. This pair reads 28 degrees against the 30 degrees of the flat-soled Double Strap on the same padding stack.

Heel height, padding and flex are stated separately so you can weigh them yourself rather than take a single word for all three.

Break-in

Three to five wears.

Care

Wipe with a dry cloth after wear. Use a neutral leather cream every eight to ten wears and let it absorb for twenty minutes before buffing. Dry away from direct heat. Full care guide.

Origin

The country of manufacture is printed on the label inside the left shoe and on the box. We make no origin claim in our product copy.

Materials, in the statutory form

Footwear materials label as required by Directive 94/11/EC. Each row names the material that makes up at least 80 per cent of that part; where no single material reaches 80 per cent, the two main materials are named.
Part	Category	Material
UpperParte superior	LeatherCouro	Full-grain bovine leather with a buckled instep strap
Lining and insockForro e palmilha	LeatherCouro	Bovine lining with a leather-covered footbed over the padding
OutsoleSola	Other materialsOutros materiais	Rubber compound over a 25 mm covered heel block

Construction and fit

Heel height: 25 mm
Last: Soft last with an instep strap on a 25 mm heel
Last width: Standard
Footbed: Lifts out. Takes a replacement up to 6 mm thick.
Chromium VI: Leather parts comply with the limit of 3 mg/kg.
Azo dyes: Dyed parts comply with the restriction on azo colourants that release listed aromatic amines.
Nickel release: Metal trim in prolonged skin contact complies with the nickel release limit.

Sizes, by measured foot length

Measure your foot standing, with the heel against a wall, and take the longer of the two. Widths are the internal measurement across the ball of the foot.

Size chart for the Mary Jane Low Heel: EU size, the foot length it is cut for in centimetres, and the internal forefoot width in millimetres.
EU size	Foot length	Forefoot width
35	22.3 cm	88 mm
36	23.0 cm	90 mm
37	23.7 cm	92 mm
38	24.3 cm	94 mm
39	25.0 cm	96 mm
40	25.7 cm	98 mm
41	26.3 cm	100 mm
42	27.0 cm	102 mm

Between two sizes, or wider than the width shown? Send us your measurements and we will suggest a size and a last.

Sold by CALJOFRE - FABRICA DE CALÇADO LDA, Idães, Portugal. Contract governed by Portuguese law. Legal guarantee of 3 years, withdrawal within 14 days.